  
|
Product list
Certificate
PVC SHEET/ BOARD
Product Introduction:
PVC sheet is a thermoplastic material having outstanding corrosion resistance, excellent electric insulating properties and good mechanical strength. The properties of the material can be varied by the addition of fillers, plasticizers, stabilizers and colourants. The material most commonly used in electrical and chemical industries is unplasticized since plasticizers affect adversely chemical and electrical properties. It is a dark grey colour and available in basic shapes such as sheets, rods, hollow bars, pipes and specialty profiles. PVC materials are easily cemented and welded using hot air.
Specification；
|
Bulk density(g/cm3) |
0.5-0.8 |
Dimensionalstability,% |
±2.0 |
|
Shore Hardness |
38--48 |
Dimensional stability,% |
<1 |
|
Tensile strength ,MPa* |
>11 |
Water absorption,% |
>17 |
|
Elongation at break,% |
>15 |
Flexural strength, MPa |
>800 |
|
Choppy impact strength kJ/m2 |
>10 or no failure |
Flexural modulus ,MPa |
>800 |
|
Vicat softening temperature |
>70C |
Screw holding strength, N |
No lead<200ppm) |
|
fire rating B1, difficult to ignite. |
|||
|
Description |
pvc sheet |
||
|
Size |
Length |
According to the customers’ request |
|
|
Width |
1-1.5m |
||
|
Thickness |
1-60mm |
||
|
1000*2000mm |
1300*2000mm |
1220*2440mm |
|
|
We can produce other special sizes according to the customers’ request. |
|||
|
Colours |
Grey,black,white,can make according custormer |
||
|
characteristics |
Good surface brightness ,no crack, Impact-resistant |
||
|
Execelletn strength and toughness performance |
|||
|
Non absorbent, Flame retarded |
|||
|
Weather resistant,water proof, acid proof, Resistant to chemicals and corrosion., Abrasive-resistant , Excellent UV resistance |
|||
|
Standardized size , No deformation, resuable, Good insulation |
|||
|
Moisture resistance, Aging-resistant |
|||
|
Remarks |
Industrial PVC sheet has a maximum long term service temperature of 60°C and also has a melting point of 75°C. Although PVC has a tensile strength of about 52Mpa,it is not the toughest engineering plastic and althougth PVC is durable,it can fracture to large impact. |
||
|
Application |
Machining; Cutting, sawing, turning, drilling, planing, milling, grinding & screwing. Forming; Stretch forming, thermoforming, vacuum forming, blow moulding, bending, folding & punching. Welding;Hot-gas, heated-tool & folding. Eviroment protection,chemical industry,mentallurgy of rare metals, extraction work of rare earth,water treatment, construction industry and bridge-building industry |
||